TeleportFling/internal/flinger/flinger_test.go

package flinger

import (
	"errors"
	"net"
	"testing"
	"time"
)

// TestEnginePatternStartStop runs the engine with the synthetic pattern source
// and verifies it produces frames on the wire and stops cleanly.
func TestEnginePatternStartStop(t *testing.T) {
	cfg := DefaultConfig()
	cfg.Source = "pattern"
	cfg.Port = 19756 // fixed high port for the test

	eng, err := New(cfg)
	if err != nil {
		t.Fatalf("New: %v", err)
	}

	eng.Start()
	defer eng.Stop()

	// Connect a raw receiver and read until the engine reports frames sent.
	conn, err := net.Dial("tcp", "127.0.0.1:"+itoa(eng.sender.Port()))
	if err != nil {
		t.Fatalf("dial: %v", err)
	}
	defer func() { _ = conn.Close() }()

	// The video loop sends ~30fps; wait for the counter to advance.
	deadline := time.Now().Add(3 * time.Second)
	_ = conn.SetReadDeadline(deadline)

	// Drain whatever arrives while waiting for the frame counter to move.
	go func() {
		buf := make([]byte, 64*1024)
		for {
			if _, err := conn.Read(buf); err != nil {
				return
			}
		}
	}()

	for time.Now().Before(deadline) {
		if eng.Status().Frames > 0 {
			break
		}
		time.Sleep(20 * time.Millisecond)
	}

	if eng.Status().Frames == 0 {
		t.Error("expected frames to be counted")
	}
}

// TestEngineConfigDefaults verifies DefaultConfig is sane.
func TestEngineConfigDefaults(t *testing.T) {
	c := DefaultConfig()
	if c.Port != 9756 {
		t.Errorf("default port = %d, want 9756", c.Port)
	}
	if c.Source != "screen" {
		t.Errorf("default source = %q, want screen", c.Source)
	}
	if c.Quality < 1 || c.Quality > 100 {
		t.Errorf("default quality %d out of range", c.Quality)
	}
}

// TestNewRejectsBadSource ensures invalid sources fail fast.
func TestNewRejectsBadSource(t *testing.T) {
	cfg := DefaultConfig()
	cfg.Source = "bogus"
	if _, err := New(cfg); err == nil {
		t.Error("expected error for unknown source")
	}
}

// TestSetErrStatus verifies runtime errors are exposed via Status and can be
// cleared.
func TestSetErrStatus(t *testing.T) {
	cfg := DefaultConfig()
	cfg.Source = "pattern"
	cfg.Port = 19757

	eng, err := New(cfg)
	if err != nil {
		t.Fatalf("New: %v", err)
	}

	if st := eng.Status(); st.Err != nil {
		t.Fatalf("expected no error initially, got %v", st.Err)
	}

	sentinel := errors.New("test capture failure")
	eng.setErr(sentinel)
	if st := eng.Status(); st.Err != sentinel {
		t.Errorf("expected sentinel error, got %v", st.Err)
	}

	eng.setErr(nil)
	if st := eng.Status(); st.Err != nil {
		t.Errorf("expected cleared error, got %v", st.Err)
	}
}

// TestValidate rejects out-of-range values.
func TestValidate(t *testing.T) {
	bad := []func(*Config){
		func(c *Config) { c.Port = 0 },
		func(c *Config) { c.Port = 70000 },
		func(c *Config) { c.Quality = 0 },
		func(c *Config) { c.Quality = 101 },
		func(c *Config) { c.FPS = 0 },
		func(c *Config) { c.StreamIndex = -1 },
	}
	for i, mutate := range bad {
		c := DefaultConfig()
		mutate(&c)
		if err := c.Validate(); err == nil {
			t.Errorf("case %d: expected validation error", i)
		}
	}

	if err := DefaultConfig().Validate(); err != nil {
		t.Errorf("default config should validate: %v", err)
	}
}

// TestBitrateMeasurement verifies the engine reports a non-zero bitrate once
// it has been streaming for a bit.
func TestBitrateMeasurement(t *testing.T) {
	cfg := DefaultConfig()
	cfg.Source = "pattern"
	cfg.Port = 19759

	eng, err := New(cfg)
	if err != nil {
		t.Fatalf("New: %v", err)
	}
	eng.Start()
	defer eng.Stop()

	// Connect a receiver so packets actually flow, and wait for the bitrate
	// window to produce a measurement.
	conn, err := net.Dial("tcp", "127.0.0.1:"+itoa(eng.sender.Port()))
	if err != nil {
		t.Fatalf("dial: %v", err)
	}
	defer func() { _ = conn.Close() }()
	go func() {
		buf := make([]byte, 64*1024)
		for {
			if _, err := conn.Read(buf); err != nil {
				return
			}
		}
	}()

	deadline := time.Now().Add(4 * time.Second)
	for time.Now().Before(deadline) {
		if eng.Status().Bitrate > 0 {
			return
		}
		time.Sleep(200 * time.Millisecond)
	}
	t.Error("bitrate stayed 0 after 4s of streaming")
}

// TestFormatBitrate checks the human-readable bitrate formatting.
func TestFormatBitrate(t *testing.T) {
	cases := []struct {
		bps  int64
		want string
	}{
		{500, "500 bps"},
		{5_000, "5 kbps"},
		{5_000_000, "5.0 Mbps"},
	}
	for _, c := range cases {
		if got := formatBitrate(c.bps); got != c.want {
			t.Errorf("formatBitrate(%d) = %q, want %q", c.bps, got, c.want)
		}
	}
}

func itoa(v int) string {
	if v == 0 {
		return "0"
	}
	var buf [20]byte
	i := len(buf)
	for v > 0 {
		i--
		buf[i] = byte('0' + v%10)
		v /= 10
	}
	return string(buf[i:])
}

// TestSetConfig verifies live config updates apply FPS/quality and reject
// invalid values, while preserving fields that can't change live.
func TestSetConfig(t *testing.T) {
	cfg := DefaultConfig()
	cfg.Source = "pattern"
	cfg.Port = 19758

	eng, err := New(cfg)
	if err != nil {
		t.Fatalf("New: %v", err)
	}

	// Update FPS/quality live.
	newCfg := DefaultConfig()
	newCfg.Source = "screen" // must be ignored (requires restart)
	newCfg.Port = 9999       // must be ignored
	newCfg.Quality = 95
	newCfg.FPS = 60
	if err := eng.SetConfig(newCfg); err != nil {
		t.Fatalf("SetConfig: %v", err)
	}

	got := eng.getCfg()
	if got.Quality != 95 {
		t.Errorf("quality = %d, want 95", got.Quality)
	}
	if got.FPS != 60 {
		t.Errorf("fps = %d, want 60", got.FPS)
	}
	// Source/port preserved.
	if got.Source != "pattern" {
		t.Errorf("source = %q, want pattern (unchanged live)", got.Source)
	}
	if got.Port != 19758 {
		t.Errorf("port = %d, want 19758 (unchanged live)", got.Port)
	}

	// Invalid config is rejected and current settings kept.
	if err := eng.SetConfig(Config{Quality: 200}); err == nil {
		t.Error("expected error for invalid quality")
	}
	got = eng.getCfg()
	if got.Quality != 95 {
		t.Errorf("quality changed after rejected update: %d", got.Quality)
	}
}